Rose electronic Ultraview Pro KVM SWITCH WITH ON-SCREEN DISPLAY Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Přepínače KVM Rose electronic Ultraview Pro KVM SWITCH WITH ON-SCREEN DISPLAY. Rose electronic Ultraview Pro KVM SWITCH WITH ON-SCREEN DISPLAY User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 52
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
10707 Stancliff Road Houston, Texas 77099
Phone: (281) 933-7673 Internet: WWW.ROSE.COM
PROFESSIONAL KVM SWITCH WITH ON
-
SCREEN DISPLAY
TM
INSTALLATION AND OPERATIONS MANUAL
Zobrazit stránku 0
1 2 3 4 5 6 ... 51 52

Shrnutí obsahu

Strany 1 - SCREEN DISPLAY

10707 Stancliff Road Houston, Texas 77099 Phone: (281) 933-7673 Internet: WWW.ROSE.

Strany 2

4 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL CPU connection All CPU connectors on the UltraView Pro are DB25F. The CPUs are connected to the

Strany 3 - LIMITED WARRANTY

MODELS ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 5 UltraView Pro models “M” chassis “B” chassis “C” chassis Figure 1. UltraView mode

Strany 4

6 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL UltraView Pro models (rear) “M” Chassis “B” Chassis “C” Chassis Figure 2. Rear Panel Label

Strany 5

CABLES ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 7 UltraView Pro Cables (See Appendix C for cable part numbers) UltraView Pro to KVM statio

Strany 6

INSTALLATION 8 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Organizing the system It is recommended that before any UltraView Pro configuration

Strany 7 - INTRODUCTION

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 9 The green POWER LED will turn on and the power-on diagnostic message will display on the KVM mon

Strany 8

10 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL (4 CPUs can be connected using a 4-port unit, 16 using a 16-port unit) Figure 3. UltraView Pro

Strany 9 - System overview

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 11 * 4 units can be cascaded using a 4-port master/16 using a 16-port master Figure 4. Cascadin

Strany 10

12 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 8. Next, select “Expansion width” from the configure system menu and press enter. Enter the n

Strany 11 - MODELS

CONFIGURATION MENUS ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 13 Main configuration menu Figure 5. Main configuration menu The UltraView

Strany 13 - CABLES

14 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Configure system menu Figure 6. Configure system menu By selecting “SYSTEM” fr

Strany 14 - INSTALLATION

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 15 Expansion If your system consists of cascaded units, the expansion section of the Configure Sys

Strany 15

16 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL To change the scan time, highlight “Scan time” and press enter. An input box will display for

Strany 16 - KVM station

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 17 Delay This setting is for PC keyboards only. It is used to adjust how long, after a key is dep

Strany 17

18 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Configure computer menu Figure 7. Configure computer menu The “Configure

Strany 18

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 19 Keyboard To change a computers keyboard and/or mouse, use the up/down arrow keys to select (hig

Strany 19 - CONFIGURATION MENUS

20 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Configure overlay Figure 8. Configure overlay menu The “Configure overlay”

Strany 20

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 21 Resolution Use this configuration to set the resolution for the KVM stations video if no comput

Strany 21

22 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Configure overlay - Computer select window The “Computer select window” section allows you to c

Strany 22

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 23 Background color To change the background color, select “Background color” and press enter. A

Strany 23

LIMITED WARRANTY Copyright  Rose Electronics 1990-2002. All rights reserved. No part of this manual may be reproduced, stored in a retrieval system,

Strany 24

24 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL This item sets the font type for the computer label. To change the font, select “Font” and pre

Strany 25

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 25 Configuration password To assign a “Configuration password”, select it from the “Configure secu

Strany 26 - Configure overlay

OPERATION 26 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Selecting a computer To connect to a computer, you can select it from the UltraView P

Strany 27

KEYBOARD COMMANDS ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 27 Keyboard commands The following table describes the available keyboard comman

Strany 28

28 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Mode value Description M1 CPU keyboard = PC mode 1 (Some IBMs & PS/1’s) M2 CPU keyboa

Strany 29

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 29 Keyboard command usage When using keyboard commands to enter information to the UltraView Pro,

Strany 30

RS232 PORT 30 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Serial Port (RS232) The RS232 serial port on the UltraView Pro’s rear panel is used

Strany 31

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 31 To update the UltraView Pro’s firmware, first download the latest revision from Rose Electronic

Strany 32 - OPERATION

32 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL If any of these errors occur, check the RS232 cable, the connectors, and the adapter. Make sure

Strany 33 - KEYBOARD COMMANDS

TROUBLESHOOTING ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 33 TROUBLESHOOTING Computer does not boot, keyboard or mouse error received.  Cab

Strany 34

FCC/IC STATEMENTS, EU DECLARATION OF CONFORMITY FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO-FREQUENCY INTERFERENCE STATEMENTS This

Strany 35

34 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Mouse does not move  Mouse not configured.  UltraView Pro turned off after or not connect

Strany 36 - RS232 PORT

SERVICE AND MAINTENANCE ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 35 Service Information Maintenance and Repair This Unit does not contain

Strany 37

SAFETY 36 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Safety This UltraView Pro KVM switch has been tested for conformance to safety regulati

Strany 38

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 37 Safety and EMC Regulatory Statements Safety Information Documentation reference symbol. If the

Strany 39 - TROUBLESHOOTING

38 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Informations concernant la sécurité Symbole de référence à la documentation. Si le produit es

Strany 40

APPENDICES ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 39 Appendix A. Initial factory settings Setting Default value KVM keyboard/mouse type

Strany 41 - SERVICE AND MAINTENANCE

40 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Appendix B. Parts and cables Part number Description CAB-CX0606Mnnn** Coax VGA-PS/2 Kbd-PS/

Strany 42 - SAFETY

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 41 Appendix C. General Specifications The UltraView Pro part number is Uxy-zUB Where x = platform

Strany 43

42 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Appendix D. Rack mount instructions The UltraView Pro can be mounted in a rack using the Rackm

Strany 44

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 43 Appendix E. Rack mount illustration Appendix F. Keyboard mapping Sun / Apple keyboa

Strany 45 - APPENDICES

TABLE OF CONTENTS Contents Disclaimer ... 1 Introduction / System

Strany 46

44 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL Appendix G. Video distance capability The table below shows the distances, resolution, and q

Strany 48

10707 Stancliff Road Houston, Texas 77099 Phone: (281) 933-7673 WWW.ROSE.COM

Strany 49

Figures Figure 1. UltraView models ... 5 Figure 2. Rear Panel ...

Strany 50

INTRODUCTION ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 1 Disclaimer While every precaution has been taken in the preparation of this manual,

Strany 51

2 ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL All UltraView Pro models can easily be expanded by chaining the units together and configuring t

Strany 52

ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL 3 Compatibility Computers Industry standard PCs, Sun, Unix computers such as RS/6000, HP, SGI, DEC

Komentáře k této Příručce

Žádné komentáře